Planers
1002BA 4-3/8"Curved Base Planer
- Powerful 11.0 AMP motor with 15,000 RPM
- Precision machined base for notching out logs at a 12-5/8" curved radius
- Large ejection chute for high rate of chip discharge
- Conveniently located front and rear grips for operator control
- Lock-on button for continuous operation
- Large two-handed design for maximum control of cutter
- Smoothes and notches out logs for a perfect fit
- Adjustable bevel radius to 11-13/16"
1806B 6-3/4" Planer
- Powerful 10.9 AMP motor with 15,000 RPM
- Cuts 6-3/4" width in a single pass
- Comfortable handle and easy depth setting
- Lock-on button for continuous operation
- Large, sturdy sole plate for added stability
- Perfect alignment of front and back grips for better control
- Precision machined aluminum base for planing accuracy
- 2-blade cutter head makes 30,000 cuts per minute for fast material removal
- Double insulated
1902 - 3-1/4" Planer
- Centerline balance with front and rear grips positioned for better control
- Simple blade setting system for fast blade installation
- Lock-on button for continous operation
- Double-edged carbide blades for long life and smooth cutting
- Precision machined base for smooth and accurate planing
- High power-to-weight ratio (5.2 AMPS; 5.5 lbs.)
1912B - 4-3/8" Planer
- Powerful 7.5 AMP motor for improved performance
- Planes up to 4-3/8" wide and 1/16" deap in a single pass
- Professional quality planer in small and compact design
- 2-blade cutter head makes 32,000 cuts per minute for fast material removal
- All-ball bearing construction for longer tool life
- Lock-on button for continuous operation
- V-groove on front shoe for easy chamfer cutting
- Precision machined aluminum base for planing accuracy
- Centerline balance with D-handle grip for easy operation
- Double insulated
2012NB - 12" Portable Planer
- Compact with less weight for easy transporting to the jobsite
- Engineered for faster, easier blade changes
- Low noise (83dB) for operator comfort
- 4-post design and diagonal cross supports for stability
- Large table extensions to support the workpiece
- Fully adjustable depth stop for repeat cuts
- L.E.D. light indicates that the planer is plugged into the power source
- Large and easy-to-operate on/off paddle switch
- Double edge planer blades
- Easily adjustable cutting depth for precision planing
- Detachable tool box for storage of the standard equipment
- Optional dust hood enables dust collection system to be connected to planer
Saws & Cutting Tools
2107F - Portable Band Saw
- Compact with less weight for easy transporting to the jobsite
- Engineered for faster, easier blade changes
- Low noise (83dB) for operator comfort
- 4-post design and diagonal cross supports for stability
- Large table extensions to support the workpiece
- Fully adjustable depth stop for repeat cuts
- L.E.D. light indicates that the planer is plugged into the power source
- Large and easy-to-operate on/off paddle switch
- Double edge planer blades
- Easily adjustable cutting depth for precision planing
- Detachable tool box for storage of the standard equipment
- Optional dust hood enables dust collection system to be connected to planer
2414DB - 14" Portable Cut-Off Saw
- AC/DC switch for use with alternative power source
- D-shape handle for easy gripping
- Lock-off button to prevent accidental start-ups
- Spark diversion guard for operator safety
- Fence adjusts 45° right and left; 3 locations for various material sizes
- Quick release vise for secure material retention and fast, repeated cut-offs
- Cuts 4-1/2" round stock at 45° and 90°
- Socket wrench stores on base for convenience
- Adjustable depth stop for precise, repeatable cutting depth
- Shaft lock for easy wheel changes
2705 - 10" Table Saw
- Powerful 15.0 AMP motor delivers 4,800 RPM
- "Tool-less" modular blade guard system with an adjustable riving knife/spreader
- Blade guard assembly with cam lock provides easy "tool-less" installation or removal
- Adjustable dual side guards allow for ease of measurement from the blade to the rip fence for cutting set-ups
- Two onboard independent stowable anti-kickback pawls and riving knife/spreader for through cuts
- Release lever for easy riving knife/spreader height adjustments into 3 different positions for through, non-through and dado cuts
- Guard design allows operator to view the blade as it contacts the material
- Right extension table allows for greater cutting capacity with the capability to rip 4x8 sheets of plywood
- Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy
- Large cutting capacity (3-9/16" at 90° and 2-1/2" at 45°) can rip 4x material in one pass; can use up to a 13/16" dado blade
- Electric brake for maximum productivity
- Extended capacity with up to 25" ripping
- Large on/off switch and easy to read scale for faster adjustments
- Complete storage capacity to hold most commonly used accessories including saw blade, power supply cord, miter gauge, rip fence, push stick, wrench, safety guard and dado blade
- 3/8" x 3/4" T-slot miter gauge grooves accepts commercial accessories with T-formed shanks for versatile cutting
- Saw blade enclosed underneath the table to protect the blade during transport
- Dead-on cam-locking rip fence and bevel locking handle for fast and easy adjustments
- Two pole slide system for raising and lowering blade for a more efficient and smoother adjustment of the blade depth
3606 - 1 HP Router
- Hi-speed motor for powerful and smooth cuts
- Lightweight (5.5 lbs.) for easy handling
- Contoured double handles for comfort and control
- Large calibrated depth control ring
- Shaft lock for quick changing of bits with just one wrench
- All-ball bearing construction for longer tool life
- 3-1/2" diameter detachable motor for use on commercial router bases
3706 - Drywall Cut-Out Tool
- Powerful 5.0 AMP motor for cutting into various materials
- 32,000 RPM for fast cutting
- Lightweight at only 2.4 lbs. for easy handling
- 2-way "Slide and Bump" on/off switch
- Sealed switch for extra protection from dust and debris and longer tool life
- Slim body design (2-1/4" diameter) for comfort and control
- "Tool-less" depth adjustment sets the desired cutting depth quickly and easily
- All-ball bearing construction for longer tool life
- Large and conveniently located shaft lock button for fast bit changes
- Technologically advanced centrifugal fan for the most efficient cooling of the motor
- Fan exhaust vents direct air and debris away from the operator
- Durable 10 ft. cord with cord guard
- Convenient storage of wrench on the cord
- Double insulated
- Accepts both 1/8" and 1/4" bits
3707FC - 1/4" Laminate Trimmer
- Quiet and powerful 4.4 AMP motor for improved performance
- Built-in shock-proof, high output, white L.E.D. light illuminates cutting edge and increases visibility with a bulb that never needs replacing throughout the life of the tool
- Fixed base with trimmer guide for use with non-piloted bits
- Soft start feature for smooth start-ups
- Electronic speed control maintains constant speed under load
- No load speed of 26,000 RPM for ultra-smooth cutting
- Simple and efficient base lock system securely fastens the base and increases productivity
- Thumb roller for fine cutting depth adjustment
- Externally accessible carbon brushes for longer tool life
- Ergonomic, slim (2-3/8") body style for comfort and control
- Deep 1-5/8" cutting when trim routing
3708FC - 1/4" Tilt Base Laminate Trimmer
- Quiet and powerful 4.4 AMP motor for improved performance
- Built-in shock-proof, high output, white L.E.D. light illuminates cutting edge and increases visibility with a bulb that never needs replacing throughout the life of the tool
- No load speed of 26,000 RPM for ultra-smooth cutting
- Electronic speed control maintains constant speed under load
- Soft start feature for smooth start-ups
- Simple and efficient base lock system increases productivity and securely fastens the base
- Thumb roller for fine cutting depth adjustment
- Externally accessible brushes for greater serviceability
- Ergonomic, slim (2-3/8") body style for comfort and control
- Tilt base for trimming angled corners and up to vertical surfaces
- Deep 1-5/8" cutting when trim routing
3709 - 1/4" Laminate Trimmer
- 4.0 AMP motor delivers 30,000 RPM for smooth trimming and light routing applications
- Smooth rack and pinion fine depth adjustment
- Top-mounted electrical cord stays out of the way for easier operation
- Transparent base for a clear view of the trimming edge
- Slim design with rubberized grip for comfort and control
- Compact with less weight (3.3 lbs.)
- All-ball bearing construction for durability and longer tool life
- Double insulated
3901 - Plate Joiner
- Rack-and-pinion vertical fence adjustment of angle guide
- One-touch 6 depth setting for #0, #10 and #20 biscuits
- Shaft lock for easy blade changes
- Easy-to-operate cam locks
- Blade cover opens easily by loosening a single knob
- Cast aluminum pivot fence with positive stops at 0°, 45° and 90°
- Designed for making strong plate joints in a minimum amount of time
- Large top grip handle
- Non-marring rubber strip insert prevents slipping of material
- Double insulated
4100NH - 4-3/8" Masonry Saw
- Powerful 12.0 AMP motor for various cutting applications
- Cuts up to 1-3/8"
- Compact design at only 8-5/8" long and weighs only 6.5 lbs. for less operator fatigue
- High power-to-weight ratio with 13,000 RPM
- Easy to adjust depth gauge for precision cutting
- Lock-off button helps prevent accidental start-ups
- Flat rear side of motor housing allows for easy blade changes
- Powerful cutting in stone, masonry, tile and concrete
4101RH - 5" Masonry Saw
- Powerful 7.9 AMP motor for the most demanding applications
- Special cover design prevents water from entering into motor housing
- Cuts up to 1-5/8" at 90° and 1" at 45°
- Ground fault circuit interrupter (GFCI) plug
- Lock-on button for continuous operation
- Includes 15 ft. of tubing, water pressure regulator and water valve
- Adjustable depth of cut
4112H - 12" Angle Cutter
- Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding
- Powerful 15.0 AMP motor delivers 5,000 RPM for the most demanding applications
- AC/DC switch for use with alternative power source
- Rubber shield helps keep debris away from operator and from entering the motor
- Removable base for a closer edge-to-edge cut
- Guide wheels on the tool guard ensure smooth tool travel over surface material
- Tool body position can be adjusted (0-80°) for operator comfort; operates independently of cutting depth for convenience and efficiency
- Rubberized wrap around handle for increased comfort and control with reduced operator fatigue
- Lock-on button for continuous operation
- All-ball bearing construction for longer tool life
- Externally accessible brushes for greater serviceability
- Built-in vacuum attachment port for efficient removal of dust and debris
- Great for builders, fire/rescue, maintenance, remodelers, roofers, masons, pipe fitters and many other applications
4114 - 14" Angle Cutter
- Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding
- Powerful 15.0 AMP motor delivers 3,500 RPM for the most demanding applications
- AC/DC switch for use with alternative power source
- Tool base can be removed for cutting closer to walls; guide wheels on the tool guard for smooth traveling
- Built-in vacuum attachment port for efficient removal of dust and debris
- Rubber shield helps keep debris away from operator and from entering the motor
- Tool base adjusts allowing up to 5" cutting depth; best for cutting split face block when building retaining walls
- Guide wheels on the tool guard ensure smooth traveling of tool over surface material when base is removed for cutting closer to walls
- Positioning of the tool body can be adjusted (0°-80°) for operator comfort; operates independently of cutting depth for convenience and efficiency
- Base has front and rear cutting guides for increased accuracy
- All-ball bearing construction for longer tool life
- Externally accessible brushes for greater serviceability
- Lock-on button for continuous operation
- Rubberized wraparound handle for increased comfort and control with reduced operator fatigue
4131 - 7-1/4" Metal Cutting Saw
- Powerful 13.0 AMP motor cuts through various types of metal
- Heavy duty blade cover provides imcreased chip protection
- Virtually spark-free cuts
- CERMET tipped blades are made with a special Ceramic-Metal mixture that resists heat, which can shorten the life of traditional carbide tipped blades
- "Tool-less" blade cover removal and chip collection window for operator convenience
- Large cutting capacity for single pass cutting
- Fast, effortless cutting through single or multiple metal pieces with burr-free ends that are cool to the touch
- Quick release blade guard lever for plunge cutting
- Stainless steel base plate for stability and durability
4200NH - 4-3/8" Circular Saw
- Fast RPM (11,000) to cut through trim, PVC and plywood
- High power-to-weight ratio
- All-ball and needle bearing construction for longer tool life
- Well balanced and lightweight for easy handling
- Lock-off button helps prevent accidental starts
- Blade-left design improves visibility of cutting line
- Dry cuts of stone and masonry with optional diamond blade
- Includes rip fence for straight cutting of plywood
4329K - Top Handle Jig Saw
- 3 orbital settings plus straight cutting with a powerful 3.9 AMP motor for use in a variety of materials
- Ergonomically designed rubberized grip for increased comfort and control
- Variable speed control dial (500-3,100 SPM) enables user to match the speed to the application for optimal cutting performance in a variety of materials
- Counterweight balancing system for reduced vibration
- Die-cast aluminum base adjusts up to 45° right or left and positive stop at 90° for solid cutting performance
- Large trigger switch for easy operation
- Lock-on button for extended operation
- Through-the-body dust port provides optimal dust management with use of clear dust cover and vacuum
- Onboard hex wrench for fast and easy blade changes and bevel adjustments
- Uses Tang shank blades
4334DWD - 18V Cordless Jig Saw Kit
- "Tool-less" base bevel adjustment bevels 45° right and left
- 3 orbital settings plus straight cutting
- Powerful two-piece motor with replaceable armature for longer life
- Electronic variable speed control dial (500-2,800 SPM) for precise speed control
- Large trigger switch and easy access lock-off button
- Accepts tang, Makita and 1/4" universal shank blades
- 18V Nickel-Metal Hydride battery runs up to 2 times longer than competitive models
- Optional vacuum attachment for a cleaner work environment
4350FCT - Top Handle Jig Saw with L.E.D. Light
- 3 orbital settings plus straight cutting with powerful 6.3 AMP motor for cutting in all varieties of materials
- 40% less tool vibration with the lowest noise level in its class
- Built-in L.E.D. light illuminates the line of cut for increased accuracy
- Variable speed control dial (800-2,800 SPM) enables user to match the speed to the application for superior results
- "Tool-less" blade change system for fast and easy blade installation and removal
- Electronic speed control maintains constant speed under load
- Soft start feature for smooth start-ups
- Die-cast aluminum base adjusts up to 45° right or left and positive stop at 90° for solid cutting performance
- Built-in dust blower clears the line of cut for greater accuracy
- Ergonomically designed rubberized top handle grip for added comfort
- Onboard hex wrench for fast, accurate bevel adjustments
- Uses Tang shank blades
4351FCT - Barrel Grip Jig Saw with L.E.D. Light
- Built-in L.E.D. light illuminates the work area
- 3 orbital settings plus straight cutting with powerful 6.3 AMP motor for cutting in all varieties of materials
- Variable speed control dial (800-2,800 SPM) enables user to match the speed to the application
- "Tool-less" blade change system for fast and easy blade installation and removal
- 40% less tool vibration with the lowest noise level in its class
- Electronic speed control maintains constant speed under load
- Soft start feature for smooth start-ups
- Die-cast aluminum base adjusts up to 45° right or left and positive stop at 90° for solid cutting performance
- Built-in dust blower clears the line of cut for greater accuracy
- Ergonomically designed rubberized barrel grip is closer to work surface for more precision cuts
- Onboard hex wrench for fast, accurate bevel adjustments
- Uses Tang shank blades only
4390D - 9.6V Cordless Recipro Saw
- 2,700 SPM and 9/16" stroke length for fast, smooth and efficient cutting
- Front grip for positive control
- Compact and lightweight (3.1 lbs.) for easy handling
- Lock-off switch helps prevent accidental starts
- Uses special blade for maximum efficiency
- Battery and charger sold separately
5005BA - 5-1/2" Circular Saw
- Powerful 8.0 AMP motor for fast cutting action
- Blade-left design improves visibility of cutting line
- Lightweight (6.2 lbs.) for increased maneuverability
- Electric brake for maximum productivity
- Lock-off button helps prevent accidental starts
- Shaft lock for fast blade change
- Double insulated
5007MG - 7-1/4" Magnesium Circular Saw
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability
- Magnesium components create a lightweight saw (10.6 lbs.) that is well balanced and jobsite tough
- Make quick, one-handed adjustments using large, rubberized levers
- Better fit and more control with comfortable rubber grip on handle
- Settings are easy to read with oversized number and ruler markings
- Large cutting capacity (2-1/2" at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°and 45°
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy
- Built-in dust blower clears the line of cut for greater accuracy
- Blade wrench is attached to saw for fast and convenient blade changing
- Reinforced power cord withstands jobsite abuse and lowers repair costs
- Includes a premium 7-1/4" carbide tipped framing blade that cuts 50% faster and lasts 2x longer
5008MGA - 8-1/4" Magnesium Circular Saw with L.E.D. Lights
- Powerful 15.0 AMP motor delivers 5,200 RPM for proven performance
- Magnesium components create a lightweight saw (11.4 lbs.) that is well balanced and jobsite tough
- Large cutting capacity (3" at 90°) and bevel capacity (0°-50°) with positive stops at 22.5° and 45°
- Make quick, one-handed adjustments using large, rubberized levers
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy
- Electric brake for maximum productivity
- Built-in dust blower clears the line of cut for greater accuracy
- Better fit and more control with comfortable rubber grip on handle
- Settings are easy to read with oversized number and ruler markings
- Blade wrench is attached to saw for fast and convenient blade changing
- Reinforced power cord withstands jobsite abuse and lowers repair costs
5012B - 11-3/4" Electric Chain Saw
- Compact and light weight (9.5 lbs.) for easy operation
- Reliable and durable performer
- High speed action (5,500 FPM chain speed) for fast cutting
- Durable poly-carbonate housing
- Special sprocket inside the end of the chain bar for smooth chain action
- Large hand protector in front deflects flying chips
- Built-in overload protector
- UL listed and double insulated
5057KB - 7-1/4" Circular Saw
- Powerful 13.0 AMP motor delivers enough power to cut five stacked 5/16" siding boards in a single pass
- Dust collector reduces the amount of dust in the air
- Guard is retractable for easier plunge cuts
- Bearings and switch are protected with dust-proof design for longer tool life
- Bevel cuts 0°-45° for a wide variety of cuts
- Shaft lock for fast and easy blade changes
- Includes rip fence for straight cuts
5090D - 9.6V Cordless 3-3/8" Circular Saw
- Compact and lightweight (4.0 lbs.) for easy handling
- Tilting base for bevel cutting up to 45°
- Adjustable cutting depth to 55/64" at 90° and 45/64" at 45°
- Blade lock for easy blade replacements
- Comfortable non-slip grip for better control
- Tile and glass cutting with optional diamond wheels and water supply kit
5104 - 10-1/4" Circular Saw
- Powerful 14.0 AMP motor delivers 3,800 RPM with power to cut beams and timber
- Large cutting and bevel capacity (3-3/4" at 90° and 2-3/4" at 45°)
- Electric brake for maximum productivity
- Precision gearing with ball and needle bearing construction for smooth and efficient power transmission
- Well balanced and weighs only 20.3 lbs. for better control
- Blade wrench is attached to the saw for fast and convenient blade changing
- Front, top and rear handles are positioned to fit hands comfortably for better control
5377MG - 7-1/4" Magnesium Hypoid Saw
- Powerful 15.0 AMP motor delivers 4,500 RPM with compressed winding technology to keep the overall size more compact yet deliver jobsite durability
- Magnesium components create a lightweight saw (13.2 lbs.) that is well balanced and jobsite tough
- Retractable hook allows tool to remain close by, but never in the way
- High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears
- Oil bath technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating for less maintenance
- Make quick, one-handed adjustments using large, rubberized levers
- Better fit and more control with comfortable rubber grip on handle
- Large cutting capacity (2-3/8" at 90°) and bevel capacity (0°-51.5°) with positive stops at 22.5°and 45°
- Settings are easy to read with oversized number and ruler markings
- Blade wrench is attached to saw for fast and convenient blade changing
- Reinforced 10 ft. power cord withstands jobsite abuse and lowers repair costs
- Includes a premium 7-1/4" carbide tipped framing blade that cuts 50% faster and lasts 2x longer
5402NA - 16-5/16" Circular Saw
- Powerful 15.0 AMP motor delivers 2,200 RPM for enough power to cut through pressure treated lumber
- Large capacity blade cuts 6-1/4" at 90° and 4-3/16" at 45°
- Electric brake for maximum productivity
- Low noise level at only 87dB for quiet operation
- Blade stabilizer for stable blade rotation and superior cutting performance
- Large depth control lever for convenience and secure adjustments
- Weighs only 32.1 lbs. for ease of operation
- Large support handle for increased operator comfort and control
5477NB - 7-1/4" Hypoid Saw
- Powerful 15.0 AMP motor for increased productivity
- Hypoid gears deliver more power and have greater surface contact than conventional worm drive gears
- Oil bath technology and sealed gear housing for less maintenance
- 0°-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cut-outs
- High quality, heat treated hypoid gears are engineered for long lasting performance
- Large cutting capacity (2-3/8" at 90°; 1-3/4" at 45° and 1-9/16" at 50°)
- Lower guard design improves performance when making bevel and narrow cuts
- Oversized top handle for better fit and added comfort
- Large levers for fast bevel and depth adjustments
- Push button spindle lock for easy blade changes
- Blade wrench is attached to the saw for fast and convenient blade changing
- Ergonomically designed rubberized grip for improved control
- Base plate is chemically treated to resist rust and warping for superior cuts
- Reinforced 10 ft. cord withstands jobsite abuse
- Large and easy to read markings on depth and bevel scales
- Externally accessible brushes for easy replacement and extended tool life
- 24T thin kerf carbide tipped blade for fast cutting
- Ideal for framers, builders, masons and contractors
5740NB - 7-1/4" Circular Saw
- Powerful 10.5 AMP motor delivers 4,700 RPM
- Heavy gauge aluminum wraparound base ensures stable support
- Ruler markings on base for precise cutting
- Low noise (84dB) for quiet operation
- Flat motor housing design increases stability when changing blades
- Includes thin kerf carbide tipped blade for fast cutting
- Line on blade case indicates blade position for accurate cutting
Drill Drivers & Wrenches
6176DW - 7.2V Cordless 3/8" Driver-Drill Kit
- 3/8" keyless chuck for fast and easy bit removal and installation
- Variable speed (0-600 RPM) for pinpoint hole positioning
- Compact and super lightweight (2.1 lbs.)
- Well balanced design with non-slip grip
- Overload protector helps prevent motor burnout
- Comes with tool case
- Special design of tool allows easy extraction for proper disposal of battery
6261DWPE - 9.6V Cordless 3/8" Driver-Drill Kit
- Makita-built motor delivers 200 in.lbs of torque
- 2-speed design (0-400 / 0-1,300 RPM) covers a wide range of drilling and driving applications
- 3/8" Keyless chuck for fast and easy bit changes
- 16 torque settings plus drill mode for optimum torque control
- Ergonomic shape fits like a glove with even pressure and easy control
- Soft grip handle provides increased comfort on the job
6271DWPE - 12V Cordless 3/8" Driver-Drill Kit
- Makita-built motor delivers 250 in.lbs. of torque
- 2-speed design (0-400 / 0-1,300 RPM) covers a wide range of drilling and driving applications
- 3/8" Keyless chuck for fast and easy bit changes
- 16 torque settings plus drill mode for optimum torque control
- Ergonomic shape fits like a glove with even pressure and easy control
- Soft grip handle provides increased comfort on the job
6281DWPE - 14.4V Cordless 3/8" Driver-Drill Kit
- Makita-built motor delivers 260 in.lbs. of torque
- 2-speed design (0-400 / 0-1,300 RPM) covers a wide range of drilling and driving applications
- 3/8" Keyless chuck for fast and easy bit changes
- 16 torque settings plus drill mode for optimum torque control
- Ergonomic shape fits like a glove with even pressure and easy control
- Soft grip handle provides increased comfort on the job
6302H - 1/2" Drill
- Powerful 6.5 AMP motor for heavy duty continuous work
- Variable speed (0-550 RPM) for drilling in a wide variety of materials
- Heavy duty 1/2" drill chuck
- Compact with less weight (4.8 lbs.)
- Large and conveniently located reversing switch and lock-on button
- Large 2-position side handle for increased operator comfort and control
- Convenient belt clip
- Double insulated
6337DWDE - 14.4V Cordless 1/2" Driver-Drill Kit
- Two-piece D-31 motor delivers power, efficiency and serviceability in a more compact size. Dual ball bearings, precision balancing and a refined high-grade field magnet guarantees maximum performance
- All Metal Gear Transmission (0-400 / 0-1,300 RPM) - features a rugged 3-stage, 13-planetary gear system providing smooth, efficient power for the most demanding applications and extended durability
- Exclusive Shift Lock™ Drive enables one-touch, quick shifting from "drill" to "driver" mode for increased operator efficiency. The Shift Lock™ Drive System locks out the clutch for superior drilling
- 2.6 Ah Ni-MH Batteries for greater capacity and longer run time - no memory effect and environmentally friendly, Ni-MH Batteries provide unmatched performance
- Locking/racheting chuck for secure tightening of bits and unmatched grip strength
- Large spindle bearing ensures positive, on-center drilling performance
- Variable speed trigger for precise operator control
- Ergonomically designed rubberized grip enhances comfort and increases operator control
- Externally accessible brushes for serviceablility and longer tool life
- Includes (2) 14.4V Ni-MH Batteries, Multi-Voltage Charger & Case
6349DWDE - 18V MXT Cordless 1/2" Driver-Drill Kit
- Two-piece ND-31 motor with dual ball bearing for longer motor life
- Delivers 560 in.lbs. of maximum torque
- Shift-Lock™ drive system quickly shifts from "drill" to "driver" mode with one touch
- Ergonomic rubberized grip for comfort and control
- Exclusive refined rare earth magnet produces maximum power
- Two-piece armature and field allows greater serviceability
- Makita-built all metal gears for maximum durability
- 3-Speed design produces 25% faster working speed with more efficiency in a wider range of applications
- Externally accessible brushes for serviceability and longer motor life
- Locking/ratcheting chuck securely grips all bits
6402 - 3/8" Drill
- Powerful 5.2 AMP motor for heavy duty performance
- Variable speed (0-1,200 RPM) for drilling in a wide variety of materials
- Separate reversing switch
- Large recessed lock-on button
- Heavy duty industrial drill chuck
- All-ball bearing construction for longer tool life
- Double gear reduction for extra power
6407 - 3/8" Drill
- Powerful 4.9 AMP motor
- Variable speed (0-2,500 RPM) for drilling in a wide variety of materials
- Low decibal rating (79dB) for quieter operation
- Large trigger switch for comfortable operation
- In-line handle design for better control
- Large recessed lock-on button
- Reversing switch is conveniently located
- All-ball bearing construction for durability and longer tool life
6408 - 3/8" Drill
- Powerful 4.9 AMP motor
- Variable speed (0-2,500 RPM) for drilling in a wide variety of materials
- Keyless chuck for fast and easy bit installation and removal
- Large trigger switch for comfortable operation
- Low decibel rating (79dB) for quieter operation
- In-line handle design for better control
- Large recessed lock-on button
- Reversing switch is conveniently located
- All-ball bearing construction for durability and longer tool life
6821 - Drywall Screwdriver
- "Sure-Lock" adjustment for consistent screw depth setting
- Ergonomically designed for reduced operator fatigue
- Lowest noise (78dB) and vibration in its class
- Nose piece is easy to install and remove
- In-line pistol grip design for greater control
- Large variable speed trigger for comfort and control
- Highest power-to-weight ratio on the market
- Large recessed lock-on button for continuous operation
6827 - Screwdriver with 6 Stage Torque (Variable Speed, Reversible)
- 6 stage externally adjustable torque sensitive clutch mechanism designed for driving to a pin-point torque
- Silent synchronized pin clutch for reduced wear and quiet operation for a longer tool life
- "Sure-Lock" depth adjustment for consistent screw depth setting
- Heat treated, machine cut gears for efficient power transfer
- Lightweight cast aluminum gear housing for durability
- Ergonomic rubberized pistol grip design for positive control
- Retractable belt clip and small center height (15/16") allow for operation in tight areas
- Conveniently located forward/reverse switch
- Powerful 6.5 AMP motor
6844 - Autofeed Screwdriver
- "Tool-less" screw depth adjustment for easy depth setting
- High torque for driving screws up to 2-15/16" long
- Built-in L.E.D. light illuminates the work area
- Adjustable stopper base can be set for different screw lengths
- Ergonomic in-line D-handle design for driving control
- Silent clutch for reduced maintenance and quiet operation
- Belt clip for attaching to belt or holster
- Rigid aluminum casing provides greater durability
- Lock-on button for continuous operation and increased productivity
- Dust proof construction for smooth sliding action while fastening
- Externally accessible carbon brushes for greater serviceability
- Anti-tilt device prevents screws from swaying while fastening
